October 12, 2023 at 12:11 amFrancisco LoteroSubscriber
I do not understand the following error, I made a body with a thickness of 2mm and 2.2mm, then I applied midsurface with a range of 20mm, all this I did in space claim, and now I get this error in Design modeler to make the control volume applying boolean
I would like to understand the reason for this error and how to solve it.
October 13, 2023 at 12:55 pmAshish KhemkaForum Moderator
Please see if the following links help:
- You must be logged in to reply to this topic.
Boost Ansys Fluent Simulations with AWS
Earth Rescue – An Ansys Online Series
- Missing Analysis Systems from toolbox
- “An error occurred while starting the solver module.” – Maybe licence problem?
- Please recommend the configuration of the computer workstation
- FLUENT application Failed to start
- No license available at this time
- ANSYS License Manager Error
- Your product license has numerical problem size limits…..
- Acoustics model in Ansys 18.1
- Download 2019 R1 Student Products
- Minimum requirement
© 2023 Copyright ANSYS, Inc. All rights reserved.