General Mechanical

General Mechanical

Input files for workshops related to ANSYS Workbench 13.0

    • tortju
      Subscriber

      Where can I find/download the input files to be used in these workshops? In the workshops the files are referred to as "Cap_fillets.stp", "Contact_Arm.stp", "Solenoid_Body.stp" etc.

    • Erik Kostson
      Ansys Employee
      Hi


      In this forum, we do not and are not able to provide any geometry files - if you have an ansys license - I would thus recommend to talk to your account manager and discuss this further with them.
      Also if you are using version 13, I would strongly recommend to upgrade to newer version such 2021 R1, as there has been many enhancements and improvements since version 13 -again talk to your account manager and discuss this further with them, or contact the ansys team.https://www.ansys.com/en-gb/contact-us, directly.

      Thank you

      Erik
    • tortju
      Subscriber
      Hi

      Part of the tutorial I am following can be found here: (removed)

      I am using the version 2021 R1, but the tutorial is of an older date.
    • Erik Kostson
      Ansys Employee
      Hi

      First of all please do not post these type of links since this might contain information that should not be there (in this case if the link contains an official ansys tutorial, this would be a breach of copyright).
      So please be careful on what sites we look at and post in this forum.
      For forum guidelines see:https://forum.ansys.com/categories/rules-guidelines


      As we said finally, in this forum, we do not and are not able to provide any geometry files - if you have an ansys license - I would thus recommend to talk to your ansys account manager and discuss this further with them.
      Also if you are using version 13, I would strongly recommend to upgrade to newer version such 2021 R1, as there has been many enhancements and improvements since version 13 -again talk to your account manager and discuss this further with them, or contact the ansys team.https://www.ansys.com/en-gb/contact-us, directly.

      Thank you

      Erik
    • tortju
      Subscriber
      Hi
      I am so sorry! I did not think about that!
      However, I am very new to this forum and I do not know how to edit my previous comment in order to remove the link.
      Also, I have tried contacting my account manager but I was directed to this forum for help...
    • Erik Kostson
      Ansys Employee
      Hello
      As we said, in this forum, we do not and are not able to provide any geometry files - if you have an ansys license - I would thus recommend to talk again to your account manager and discuss this further with them, and let them know that we can not provide for this here.
      Of course we do have many free courses here which you could look at.
      https://courses.ansys.com/index.php/structures/
      https://courses.ansys.com/index.php/courses/getting-started-with-ansys-mechanical/
      All the best

      Erik
Viewing 5 reply threads
  • You must be logged in to reply to this topic.