December 5, 2017 at 8:00 amAyonzSubscriber
Hi there, i have a challenge with ANSYS 18.2 student version. I installed the ANSYS AIM for student on my windows 8, upon running the workbench package,i noticed that the analysis component of the toolbox was not there, i reinstalled 3 times following the right procedure of running as administrator but all to no avail. i checkd online and there were suggestions that the package was not licensed, im not certain if thats the problem but i would appreciate if i can get a solution. i look forward to hearing from you preferrably through firstname.lastname@example.org...Many thanks. Ayonz
December 5, 2017 at 1:05 pmpeteroznewmanSubscriber
There are two separate products: ANSYS AIM and ANSYS Student. You pick which one you want to install by selecting the button on the left or the button on the right. ANSYS AIM is not Workbench and does not have a Toolbox full of tools. For that you need to install ANSYS Student.
If you already installed AIM, you can either uninstall that, or install ANSYS Student as well.
Hope that solves your problem.
- You must be logged in to reply to this topic.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- Error with workbench SceneGraphChart
- Workbench error
- Workbench not opening
- How can I renew ANSYS student version license?
- License Error
- Sizing on Ansys Workbench 19.2
- Error: Exception of type ‘Ansys.Fluent.Cortex.Cortex not availableException’ was thrown
- Licensing error while opening ANSYS Mechanical
- An error occurred when the post processor attempted to load a specific result.
- Problem with FlexNet Licensing
© 2023 Copyright ANSYS, Inc. All rights reserved.