Is it possible to simulate a free jet (Water) in the air using Ansys Discovery?
-
-
Dear Ladies and Gentlemen,
For the processing of a study project, a flow simulation of water jet nozzles is to be carried out using ANSYS Discovery.
I have already simulated the water flow through the nozzle as shown in the image. The simulation stops as soon as the water flow would leave the nozzle.
Is it possible to simulate the following free jet of the water stream in the air?
Thanks for the help.
-
-
-
- You must be logged in to reply to this topic.
Boost Ansys Fluent Simulations with AWS
Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Ansys Blog
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
-
Rob
-
Guilin Sun
-
peteroznewman
-
DrAmine
-
Erik Kostson
You are navigating away from the AIS Discovery experience