Electronics

Electronics

Magnetic induction in electrical transformer

    • andrein13
      Subscriber

      I modeled a single-phase transformer in maxwell 3D. I would like to know if I can get magnetic induction only on a determined path at the magnetic core. For example, as in the image attached on the route A-B-C-D-E where to get the values of magnetic induction at different points along the route.

      Thank you!

    • icellb1
      Ansys Employee
      Hi, ,nWe are not allowed to click on non-displaying images, could you please attach your screenshot again using upload image rather than upload file? Thank you.n
    • andrein13
      Subscriber
      HI, icellb1 ,nPlease let me know if you can see the picture now.nn
    • icellb1
      Ansys Employee
      Hi,nYou can create a polyline along the path you showed. After solving, right click result-->create field report. On the left choose polyline for geometry, on the right choose B field to plot.n
Viewing 3 reply threads
  • You must be logged in to reply to this topic.