June 30, 2019 at 2:06 pmmazanSubscriber
To perform fatigue analysis on titanium alloy.. the stress life curve is missing in material property .. how to add sn curve in material property or is there any other way to perform fatigue analysis
June 30, 2019 at 2:58 pmpeteroznewmanSubscriber
Note: This discussion is a duplicate of this post. Please only post once. Keep this discussion open and stop using the other one.
What version of ANSYS are you using?
You need to acquire the S-N tabular data, either from an online source or perform your own fatigue testing.
Open Engineering Data, and in the Life category of the Toolbox, drag and drop an S-N Curve onto titanium alloy. Then copy and paste the data into the form. There is a Linear S-N Curve if all you know is the Fatigue Strength Exponent, m (slope) and Fatigue Strength Coefficient, A (intercept) and there is also a Bilinear S-N Curve.
- You must be logged in to reply to this topic.
Boost Ansys Fluent Simulations with AWS
Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- How to work with STL file?
- Rotate tool in ANSYS Design Modeler
- Using Symmetry in DesignModeler and Expanding the Results
- section plane
- material properties
- ANSYS FLUENT – Operation would result in non manifold bodies
- drawing a geometry by importing a table of points
- Geometry scaling
- Parameters not imported into Workbench 18.2 from Solidworks/Inventor
- Coordinates orientation
© 2023 Copyright ANSYS, Inc. All rights reserved.