-
-
July 29, 2023 at 5:31 am
Andres Valencia
SubscriberHi everyone
I am trying to model an Aorta. In inflation under the mesh mode, when selecting all the faces of the geometry except by 2 (the inlet and outlet) for the boundary box, and then hitting apply, the message "no selection" keep appearing, as shown in the photos.
However when I select less faces (for example 48), the boundary box accepts the value.
Could anyone explain me what am I doing wrong, or is it something about the ansys student version.
Thank you
-
July 29, 2023 at 9:49 pm
peteroznewman
SubscriberIt's not the Student version. The full version will behave the same.
-
August 1, 2023 at 4:51 am
Andres Valencia
Subscriberso is it something I am doing wrong, how could I proceed
-
- You must be logged in to reply to this topic.

Boost Ansys Fluent Simulations with AWS
Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.

Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.

Ansys Blog
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- how to improve the inflation quality at sharp corners?
- ANSYS Workbench Measuring within Design
- check element type
- The mesh file exporter could not resolve cyclic dependencies in overlapping contact regions error
- Conformal vs Non-Conformal Mesh
- execution error inside the mesher. The process suffered an unhandled exception or ran out of memory
- Meshing Error
- Error in meshing
- inflation created stairstep mesh at some location
- How to resolve Mesh Failure
-
7646
-
4468
-
2955
-
1427
-
1322
© 2023 Copyright ANSYS, Inc. All rights reserved.