May 24, 2018 at 1:07 amfarazkhan132002Subscriber
I'm trying to simulate a blood pump. I have created the impeller and in the cell zone condition the option to give mesh motion is not active. The software is on university library pc. Is it because of the licensing issue or do we need to make any changes in the modelling and mesh?
May 24, 2018 at 12:49 pmVishal GanoreAnsys Employee
You will find the motion settings available under the Dynamic mesh menu. Please explore that for your problem to see how it fits.
May 25, 2018 at 1:22 amfarazkhan132002SubscriberI found out that you can give mesh motion in time based analysis i.e transient where as I was doing it in the steady state to which the mesh motion option wasnt active.
May 27, 2018 at 11:52 amRaef.KobeissiSubscriber
Mesh motion can only be used in transient cases.
May 11, 2020 at 8:39 amfeddeuserSubscriber
Thanks! I was facing the same issue...
- You must be logged in to reply to this topic.
Simulation World 2022
Check out more than 70 different sessions now available on demand. Get inspired as you hear from visionary companies, leading researchers and educators from around the globe on a variety of topics from life-saving improvements in healthcare, to bold new realities of space travel. Take a leap of certainty and check out a session today here.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- Suppress Fluent to open with GUI while performing in journal file
- Heat transfer coefficient
- What are the differences between CFX and Fluent?
- Floating point exception in Fluent
- The solver failed with a non-zero exit code of : 2
- Getting graph and tabular data from result in workbench mechanical
- Difference between K-epsilon and K-omega Turbulence Model
- Time Step Size and Courant Number
- Mesh Interfaces in ANSYS FLUENT
- error in cfd post
© 2022 Copyright ANSYS, Inc. All rights reserved.