Preprocessing

Preprocessing

Mesh on Ports Non-Planar

    • JuliaB
      Subscriber

      Hi, 


      I have defined a lumped port on a 2D rectangular sheet but am still receiving this error. I have multiple ports defined in this project and I am only getting the error for one of the ports. 



      Design:HFSSDesign2 (DrivenModal), Port refinement, process hf3d error: The mesh on port 1 is non-planar. Check the port geometry and verify that the mesh accurately represents the port.. 



      Is there anything that I can change with the mesh to fix this error? 


      Thank you! 

    • Keyur Kanade
      Ansys Employee

      Can you please insert some images and explain?

    • JuliaB
      Subscriber

      I have 4 ports spaced around the torus. One of the ports (photos below) is giving me the non-planar mesh error.  


    • dean.darnell
      Subscriber

       I am interested in this as well. kkandade do you have any suggestions? I am getting something similar

    • Keyur Kanade
      Ansys Employee

      I am asking our EBU experts to check this. 


       

    • JuliaB
      Subscriber

      Thank you. Please let me know if they have a possible solution. 

Viewing 5 reply threads
  • You must be logged in to reply to this topic.