February 14, 2023 at 2:27 pmPeter FelbingerSubscriber
i am new to the MHD module and have a problem with my simulation.I want to apply an external magnetic field to magnetic particles to attract them to a wall of my geometry. My particles exist as a granular phase in the Mixture Model. The properties are those of iron oxide with a size of 1 micrometre. My primary phase is water. If I now apply an external magnetic field, I do not see any movement of the secondary phase.What could be the problem that there is no force effect on my phase? Does anyone have a suggestion?
February 14, 2023 at 3:06 pmRobAnsys Employee
I don't think the two models are automatically connected. You may need to use a UDF to move the granular phase based on the charge and field gradients.
- You must be logged in to reply to this topic.
Boost Ansys Fluent Simulations with AWS
Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- Error with workbench SceneGraphChart
- How can I renew ANSYS student version license?
- Workbench error
- Workbench not opening
- License Error
- Sizing on Ansys Workbench 19.2
- Error: Exception of type ‘Ansys.Fluent.Cortex.Cortex not availableException’ was thrown
- Licensing error while opening ANSYS Mechanical
- Ansys2021R2 ansys212 seg faults immediately on RHEL8.2
- An error occurred when the post processor attempted to load a specific result.
© 2023 Copyright ANSYS, Inc. All rights reserved.