November 18, 2019 at 9:38 amIsuruDSubscriber
Hello, i have been trying to model three point bending test for a plain concrete with circular cross section. i used Drucker Prager model for the concrete. but model does not solve giving me errors. material properties entered as shown in the figure below . please let me know if something wrong ? thank you.
November 18, 2019 at 10:36 amAniketAnsys Employee
ANSYS employees are not allowed to download attachments. Kindly post your images inline. Also, please share the errors that you get.
Guidelines on the Student Community
November 19, 2019 at 6:11 am
November 19, 2019 at 7:32 amIsuruDSubscriber
thank you for the reply Mr.Aniket.
November 19, 2019 at 9:20 amAniketAnsys Employee
What are the error that you get in the model?
November 19, 2019 at 4:33 pm
November 19, 2019 at 4:34 pmIsuruDSubscriber
waiting for your reply. and also i would like to capture the failure of the specimen. any advice ?? thank you very much
November 21, 2019 at 3:31 pmAniketAnsys Employee
right-click on the Solution branch in the tree, and then select "Open Solver Files Directory" this should have file.err. Please open it in a text editor and post the content of the err file as text in your reply.
- You must be logged in to reply to this topic.
Boost Ansys Fluent Simulations with AWS
Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- Solver Pivot Warning in Beam Element Model
- Saving & sharing of Working project files in .wbpz format
- Understanding Force Convergence Solution Output
- An Unknown error occurred during solution. Check the Solver Output…..
- What is the difference between bonded contact region and fixed joint
- User manual
- The solver engine was unable to converge on a solution for the nonlinear problem as constrained.
- whether have the difference between using contact and target bodies
- material damping and modal analysis
- Colors and Mesh Display
© 2023 Copyright ANSYS, Inc. All rights reserved.