monitor測到1.1

- April 4, 2023 at 4:15 pm
  
  Da cheng Mo
  Subscriber
  
  老師您好:
  在之前的發問得知如果在CW下將amplitude設為1，就相當於1v/m的穏態入射。
  但我monitor會測到1.1，這樣是為什麼呢？(結構如下圖)
  光源採用plane wave ,320nm
- April 4, 2023 at 5:06 pm
  
  Guilin Sun
  Ansys Employee
  
  场为1.1没有什么问题。如果监视器位于光源与器件之间，那里有入射光和反射光，相干叠加的强度在0~2之间都正常。
  如果是透射率反射率，可能设置有问题，参见
  Ansys Insight: 透射率反射率大于1，或者透射率反射率之和大于1的原因与解决方案–综合贴

Viewing 1 reply thread

You must be logged in to reply to this topic.

Ansys Innovation Space

Boost Ansys Fluent Simulations with AWS

Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.

Earth Rescue – An Ansys Online Series

The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.

Ansys Blog

Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.

Trending discussions