Electronics

Electronics

motorcad生成vbs文件在Ansys EDT2021R1中运行报错 。Motorcad generates VBS file in Ansys EDT2021R1 running error.

    • NaplonDennis
      Subscriber

      大家好,我在motorcad14.1.5中建立好了电磁模型,导出了vbs脚本,在Ansys EDT2021R1中运行脚本,出现了如下报错:Invalid PropServer 'Rotor'. Line(353): " oEditor.ChangeProperty ("NAME:AllTabs", _"

      Hello, I have built the electromagnetic model in Motorcad14.1.5, exported the VBS script, and run the script in Ansys EDT2021R1, the following error occurs: Invalid PropServer 'Rotor'. Line(353): " oEditor.ChangeProperty ("NAME:AllTabs", _"

      有人知道或者遇到过这种报错吗,希望赐教 。

      Does anyone knows or encountered this kind of errors, hope to give advice.

    • NaplonDennis
      Subscriber

      大家好,我已经找到问题所在,问题在于我在使用motorcad建模时,对转子V型槽进行了倒圆角,取消倒圆角后生成的vbs脚本就可以完美运行。

      Hello everyone, I have solved the problem. The problem is that WHEN I use MotorCAD modeling, the rotor v-groove fillet, after canceling the fillet generated VBS script can run perfectly.

Viewing 1 reply thread
  • You must be logged in to reply to this topic.