March 20, 2021 at 7:30 pmLarissa333SubscriberHello,In twin-screw extrusion simulation do I have to apply remeshing for the moving parts? What about the fluid, do I have to apply remeshing in any way for this domain as well?nMy mesh in composed of two screws and a fluid domain that is shaped like a cylinder, which I saw in an example in the ansys website. Why do I have to draw the mesh like this, when there are points of the fluid and the screws that will be superposed?Thanks!nRegards,n
March 22, 2021 at 3:55 amKeyur KanadeAnsys EmployeePlease have a look at help document at nAlso please have a look at nnThis is for conformal mesh. If you are talking about overset mesh, please have a look at help document. nRegards,nKeyurnHow to access Ansys Online Help DocumentnHow to show full resolution imagenGuidelines on the Student CommunitynHow to use Google to search within Ansys Student Communitynn
- You must be logged in to reply to this topic.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- Suppress Fluent to open with GUI while performing in journal file
- Floating point exception in Fluent
- What are the differences between CFX and Fluent?
- Heat transfer coefficient
- Getting graph and tabular data from result in workbench mechanical
- The solver failed with a non-zero exit code of : 2
- Difference between K-epsilon and K-omega Turbulence Model
- Time Step Size and Courant Number
- Mesh Interfaces in ANSYS FLUENT
- error in cfd post
© 2023 Copyright ANSYS, Inc. All rights reserved.