December 3, 2019 at 6:21 amHinano1206Subscriber
I'm watching the airflow with the air conditioner and ventilation in the room.
When I put a desk in room, I get this "Multizone found free body in swept body " error.
How can I get beter?
December 3, 2019 at 8:41 amHinano1206Subscriber
When I sliced the surface, I was able to cut the mesh.
However, When I open FLUENT,I get an error "wrong type argument"
What does this represent?
December 3, 2019 at 4:47 pmRobAnsys Employee
What other text does Fluent display? There's sometimes something more descriptive just before the error type.
December 4, 2019 at 1:55 amHinano1206Subscriber
I got a warning.
"During the geometry update, one or more objects may have lost some scoped attachments."
However, the mesh could be cut by slicing the geometry with the surfase.
Then I got an error "wrong type argument" in FLUENT.
Is this the wrong way to cut the mesh?
December 4, 2019 at 9:56 amRobAnsys Employee
That's a Workbench warning/error. If you open Meshing what can you see? If that's OK, open Fluent and have a look.
- You must be logged in to reply to this topic.
Boost Ansys Fluent Simulations with AWS
Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- how to improve the inflation quality at sharp corners?
- ANSYS Workbench Measuring within Design
- check element type
- The mesh file exporter could not resolve cyclic dependencies in overlapping contact regions error
- Meshing Error
- Error in meshing
- Conformal vs Non-Conformal Mesh
- execution error inside the mesher. The process suffered an unhandled exception or ran out of memory
- How to resolve Mesh Failure
- inflation created stairstep mesh at some location
© 2023 Copyright ANSYS, Inc. All rights reserved.