Fluids

Fluids

Numerical simulation using Rosseland radiation model

    • jaysuryawanshi1995
      Subscriber

      good evening everyone,


      I'm working on numerical simulation analysis using Fluent in ANSYS. I have used Rosseland for radiation model, as my problem is having its optical thickness more than 3. But I'm not being able to use the thermal slip condition, as it has been suggested in ANSYS help to use that special boundary condition at walls. so my question is how to use or add free slip or temperature slip boundary conditions at walls?


      please help me with this problem.


      my email id is: jaysuryawanshi1995@gmail.com

    • DrAmine
      Ansys Employee

      It will be automatically accounted for. No special input from your side here.

    • jaysuryawanshi1995
      Subscriber

      I was also thinking in the same way earlier but after reading ANSYS help it is clear that I have to add special boundary condition for Rosseland model. and my question was how to add temperature slip within fluent using Rosseland model?

    • DrAmine
      Ansys Employee

      No special input is required.

Viewing 3 reply threads
  • You must be logged in to reply to this topic.