Penetration of line body through 3d solid.
-
-
Hi, i am working on a soft robotic finger model which is displaced using a wire to analyse the stress and deformation in the finger. At higher displacements, the wire penetrates through the solid finger.
Any help would be appreciated.
Thank you!
-
I turned on Auto Time Stepping, increased the number of substeps in step 2 and 3 to 20 initial, and minimum, reduced the element size, and put more elements around holes (face sizing 1 mm), turned off Adjust to Touch and set the solver to Direct.
I attach a different model to the one above because I repeated the steps in 18.2 but I didn't run it to the end and it may not get to the same point.
-
- You must be logged in to reply to this topic.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Ansys Blog
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
-
Rob
-
Guilin Sun
-
peteroznewman
-
DrAmine
-
javat33489
You are navigating away from the AIS Discovery experience