May 18, 2022 at 10:34 amfatemeh.hosseiniSubscriber
I am simulating particles in a turbulent flow in tube by coupling EDEM and Fluent. I should use periodic boundary condition. before coupling EDEM I use periodic boundary condition with specify mass flow rate.
When I couple EDEM with fluent, mass flow rate is deactivated and I can just specify pressure gradient.
I want to ask, is there any restriction on using periodic boundary condition and DPM? If yes, How can I specify flow rate in this condition?
FatemehMay 18, 2022 at 12:18 pmRobForum ModeratorThe limitations are here, https://ansyshelp.ansys.com/account/Secured?returnurl=/Views/Secured/corp/v221/en/flu_ug/flu_ug_sec_periodic_overview.html%23flu_ug_sec_periodic_restrict and it looks to depend on what the particles are doing.
Viewing 1 reply thread
Ansys Innovation Space
- You must be logged in to reply to this topic.
Boost Ansys Fluent Simulations with AWS
Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.Trending discussions
- Floating point exception in Fluent
- What are the differences between CFX and Fluent?
- Heat transfer coefficient
- Difference between K-epsilon and K-omega Turbulence Model
- Getting graph and tabular data from result in workbench mechanical
- The solver failed with a non-zero exit code of : 2
- Time Step Size and Courant Number
- Mesh Interfaces in ANSYS FLUENT
- Suppress Fluent to open with GUI while performing in journal file
- error: Received signal SIGSEGV
© 2023 Copyright ANSYS, Inc. All rights reserved.Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.