September 22, 2023 at 4:23 amBill TappSubscriber
I have a thesis project using LS-DYNA 2023. I am attempting to use a single point of reference on a 3d solid plate and see the stress of it over time (cannot select surface). I have tried using named selections and coordinate system to highlight the point i want with no success. I have done similar things with fluent before but cannot seem to make this work. Sorry if my explaining is bad
September 22, 2023 at 9:50 amSampat KumarAnsys Employee
Do you want to see the stress variation over time at a specific point?
September 24, 2023 at 3:24 amBill TappSubscriber
Yeh mate thats exactly what i want. Like be able to export a data table of stress vs. time on a selected point
September 25, 2023 at 11:11 pmBill TappSubscriber
Is there an easy way to do this?
September 30, 2023 at 2:41 pmSampat KumarAnsys Employee
you can try the way that I have explained in the Attached forum thread!
- You must be logged in to reply to this topic.
Boost Ansys Fluent Simulations with AWS
Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- Explicit dynamics ERRORS
- turning simulation
- explicit dynamics
- getting zero maximum and minimum stress value in explicit analysis
- How to figure out impact force in Explicit Dynamic Analysis
- How do get Full values instead of just minimum and maximum ?
- Monte Carlo Simulation
- Running an explicit dynamics simulation on a composite plate
- Euler Domain Restricting Simulation
- Error inside ANSYS LS Dyna: “An error occurred inside the SOLVER module: general error.”
© 2023 Copyright ANSYS, Inc. All rights reserved.