-
-
September 27, 2017 at 11:19 am
DrAmine
Ansys EmployeeHow to print the connectivity of the selected compute nodes in FLUENT?
-
September 27, 2017 at 11:19 am
DrAmine
Ansys EmployeeThe connectivity of the selected compute nodes, which is written at the Start of FLUENT while spawning the nodes and whenever a transcript file needs to be written, could be written by typing in the FLUENT Console: /parallel/show-connectivity 0 . The same information could be accessed from GUI under: Parallel>Network>Connectivity…. For more information, please review Parallel Connectivity Dialog Box from FLUENT User’s Guide
-
- You must be logged in to reply to this topic.

Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.

Ansys Blog
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- Suppress Fluent to open with GUI while performing in journal file
- Floating point exception in Fluent
- What are the differences between CFX and Fluent?
- Heat transfer coefficient
- Getting graph and tabular data from result in workbench mechanical
- The solver failed with a non-zero exit code of : 2
- Difference between K-epsilon and K-omega Turbulence Model
- Time Step Size and Courant Number
- Mesh Interfaces in ANSYS FLUENT
- error in cfd post
-
2644
-
2110
-
1335
-
1112
-
461
© 2023 Copyright ANSYS, Inc. All rights reserved.