Kampus Merdeka

Kampus Merdeka

Problem in Metal Cold Forming Analysis

    • raihaneddrin15
      Subscriber

      I got this notification when run the solve of Metal Cold Forming Analysis, anybody know how to solve this one??

      Regards, thank you

    • Ashish Khemka
      Ansys Employee

      Hi,

       

      This is a warning message. If the results look fine then you can ignore the warning message. For the reason for this warning, please refer to the links below:

       

      MPC Contacts in ANSYS - Yes or No? - FEA Tips

       

      one or more mpc contact regions or remote boundary conditions may have conflicts… (ansys.com)

      Regards,

      Ashish Khemka

    • raihaneddrin15
      Subscriber

      Thank you for the answer Mr. Ashish Khemka and I'm sorry for the late respon, In this simulation I found new problem like this, can you help me solve this problem?

    • Ashish Khemka
      Ansys Employee

      Hi,

       

      Try turning off the Small Sliding in the Details of the Contact:

       

      On large deflection, read this article:

       

      To Use Large Deflection or Not, That Is the Question - PADT (padtinc.com)

       

      I hope this may help.

       

      Regards,

      Ashish Khemka

    • raihaneddrin15
      Subscriber

      Thank you for answering Mr. Ashish Khemka, it's really helpfull

      Regards, thank you

Viewing 4 reply threads
  • You must be logged in to reply to this topic.