December 2, 2019 at 10:17 amDenislavFluentSubscriber
I am doing a 3d model of a chemical reactor in Fluent. The 2d model works well, so now am I trying to make it 3d. It's for my bachelor thesis. The reactor have two part a diffusion bed with particles and the ''flow part'', where the fluid goes in and out. I have the following warning, when I initialize the calculation.
WARNING: Unassigned interface zone detected for interface 12
WARNING: Unassigned interface zone detected for interface 13
I checked the zones and these are two wall, which I have NAMED in my mesh. So I do not understand, why I have these warning. I have 2 screenshot of fluent model and the mesh
December 2, 2019 at 10:19 amDenislavFluentSubscriber
Now I see the quality of the pictures is very bad. Maybe attaching the files itself? I have not find something like attaching file in forum...
December 2, 2019 at 10:31 amDrAmineAnsys Employee
You probably have a non-conformal mesh? Can you confirm? You have interface boundaries which are not assigned: assign them under "Mesh Interfaces" in the tree.
- You must be logged in to reply to this topic.
Boost Ansys Fluent Simulations with AWS
Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- Suppress Fluent to open with GUI while performing in journal file
- Floating point exception in Fluent
- What are the differences between CFX and Fluent?
- Heat transfer coefficient
- Getting graph and tabular data from result in workbench mechanical
- The solver failed with a non-zero exit code of : 2
- Difference between K-epsilon and K-omega Turbulence Model
- Time Step Size and Courant Number
- Mesh Interfaces in ANSYS FLUENT
- error: Received signal SIGSEGV
© 2023 Copyright ANSYS, Inc. All rights reserved.