January 29, 2021 at 5:31 amjohnny02Subscribern
January 29, 2021 at 5:31 amjohnny02SubscriberHi guys this is johnny here. I am having a question about post-processing. my question is I completed the simulation of solid-solid mixing in a vessel and I need to measure volume fraction at different height of vessel to compare with the experimental data.so could someone tell me how can I do this?.Thanks in advance?n?n?nRegards nJohnnyn
January 29, 2021 at 9:46 amRobAnsys EmployeeWhat are you comparing it with? Ie point data, volume average, photograph etcn
January 29, 2021 at 10:12 amDrAmineAnsys EmployeeJust for info: Changed the title of the discussion.n
January 30, 2021 at 7:49 am
January 30, 2021 at 12:14 pmKarthik RAdministratorHello,nCreate cut-planes at different heights in your tank. Then, do an area-weighted average at each of these individual cut-planes. This should get you the quantity you are looking for.nKarthikn
February 21, 2021 at 4:13 pmjohnny02SubscriberThank you karthik.n
- You must be logged in to reply to this topic.
Boost Ansys Fluent Simulations with AWS
Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- Suppress Fluent to open with GUI while performing in journal file
- Floating point exception in Fluent
- What are the differences between CFX and Fluent?
- Heat transfer coefficient
- Getting graph and tabular data from result in workbench mechanical
- Difference between K-epsilon and K-omega Turbulence Model
- The solver failed with a non-zero exit code of : 2
- Time Step Size and Courant Number
- Mesh Interfaces in ANSYS FLUENT
- error: Received signal SIGSEGV
© 2023 Copyright ANSYS, Inc. All rights reserved.