May 31, 2023 at 12:35 pm
June 1, 2023 at 6:30 amKeyur KanadeAnsys Employee
Do you mean to recreate the geometry?
You can check basic tutorials on SpaceClaim.
Please check following videos
Ansys Meshing Sizing:
Ansys Meshing: Decomposition for hex meshing:
Ansys Meshing: Meshing Methods:
June 14, 2023 at 9:58 amRavikiran BasavarajuSubscriber
Thank you for the reply and links.
I want to conver the model to sweepable so that there are only Hex elements. So for this i was susccessful to slice the top head part and make it sweepable. And need help with the bottom half to conver or redraw to make it sweepable to have only hex elements. Any help or suggestions are welcome.
- You must be logged in to reply to this topic.
Boost Ansys Fluent Simulations with AWS
Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- How to work with STL file?
- Rotate tool in ANSYS Design Modeler
- section plane
- Using Symmetry in DesignModeler and Expanding the Results
- ANSYS FLUENT – Operation would result in non manifold bodies
- drawing a geometry by importing a table of points
- material properties
- Coordinates orientation
- “contact pair has no element in it.” how to resolve this problem
- Parameters not imported into Workbench 18.2 from Solidworks/Inventor
© 2023 Copyright ANSYS, Inc. All rights reserved.