Rope Tension for heavy electric wire routing
-
-
Hello friends.
I am studying about force for heavy electric wire routing . As You can see, there are 3 pair torque power plant. and The left big one is just following the wire move. And the wire is about to move 300M, 500M, 700M. So i want get the force for routing heavy electric wire.
I use revolute to 7 cylinder and also set up transitional joint to the end of wire
I use displacement to the another end of wire and set up 200m moving.
and I was modeling the subject using ug nx. The mode is static structural using step time 10s but The model cannot be solved i dont know why. If there is someone who have idea, please help me please
-
- You must be logged in to reply to this topic.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Ansys Blog
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
-
Rob
-
Guilin Sun
-
peteroznewman
-
DrAmine
-
javat33489
You are navigating away from the AIS Discovery experience