TAGGED: fatigue, remote-displacement, static-structural
-
-
November 17, 2023 at 6:17 am
Lucas Turcatto
SubscriberHello, everyone!
I searched through references and this forum regarding fatigue analysis in shafts subjected to torques caused by gears, but I could only find analyses on torsion or bending of shafts.
Due to my lack of experience with Ansys in simulations involving shafts, I also had doubts about the "Remote Displacement" that defines the boundary conditions of the problem. I found a very good explanation at this link (https://forum.ansys.com/forums/topic/how-can-i-simulate-this-shaft-from-shigleys-book/) for the same problem, but I still can't fully grasp it.
What I need is to define the Von-Mises stress and safety factor of this shaft with fatigue life.
In summary, I have two main questions:
1 - Can I replace the application of these forces with a torque?
2 - How does the application of "remote displacement" work in detail for this project?
The Free Body Diagram The forces
This is the result of my simulation so far:
-
November 21, 2023 at 12:15 pm
Ashish Khemka
Forum ModeratorHi,
Please see if the following link helps: Utilizing Remote Points Properly - Lesson 4 - ANSYS Innovation Courses
Regards,
Ashish Khemka
-
- You must be logged in to reply to this topic.

Boost Ansys Fluent Simulations with AWS
Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.

Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.

Ansys Blog
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- How to do the frequency response of the nonlinear vibration of a flexible PCB?
- Importing Line and Solid Bodies from SpaceClaim to Mechanical
- how to open SendCommand in Ansys
- problems facing during solution
- Still facing the same issue
- Failed to move file from solver directory to scratch directory: file.rst
- Adaptive Sizing
- Stiffness factor
- Import DAT file
- Import pressure data (coordinates and value) to ansys workbench through excel
-
8808
-
4658
-
3153
-
1680
-
1470
© 2023 Copyright ANSYS, Inc. All rights reserved.