-
-
November 10, 2017 at 9:59 am
Carlo_M
SubscriberI am making a static structural calculation in Ansys Workbench.
Since last week I keep getting the error SIG$SEGV, this was after extending my license for Ansys 17.2
Then I installed version 18.2 and the error was gone for a few days, but now it is back again.
Some models I can solve without errors, but other models I keep getting this error, can anyone help me with this?
What should I do? Is it something in the model, if yes what to do?
*** ERROR *** CP = 132.304 TIME= 10:57:57
An unexpected error ( SIG$SEGV ) has occurred... ANSYS internal data
has been corrupted. ANSYS is unable to recover and will terminate.
Previously saved files are unaffected. Please send the data leading
to this operation to your technical support provider, as this will
allow ANSYS, Inc to improve the program.
Current ANSYS Traceback:
CombineResultsFile
CombineDistFiles
slvend
solvcl
ANSYSThanks
-
November 27, 2019 at 11:23 am
JohannesSchwoeller
SubscriberHello,
i have the same error when I'm adding the command "neqit". Can anyone help?
ANSYS Version 2019 R1
*** ERROR *** CP = 0.969 TIME= 12:17:20
An unexpected error ( SIG$SEGV ) has occurred... ANSYS internal data
has been corrupted. ANSYS is unable to recover and will terminate.
Previously saved files are unaffected. Please send the data leading
to this operation to your technical support provider, as this will
allow ANSYS, Inc to improve the program.
-
- You must be logged in to reply to this topic.

Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.

Ansys Blog
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- Saving & sharing of Working project files in .wbpz format
- An Unknown error occurred during solution. Check the Solver Output…..
- Understanding Force Convergence Solution Output
- Solver Pivot Warning in Beam Element Model
- Colors and Mesh Display
- How to calculate the residual stress on a coating by Vickers indentation?
- whether have the difference between using contact and target bodies
- What is the difference between bonded contact region and fixed joint
- The solver engine was unable to converge on a solution for the nonlinear problem as constrained.
- User manual
-
2642
-
2110
-
1335
-
1112
-
461
© 2023 Copyright ANSYS, Inc. All rights reserved.