Electronics

Electronics

Simulate single-phase electrical transformer

    • andrein13
      Subscriber
      Hello,nn I would like to know if the Maxwell program can simulate the operating mode of a single-phase electrical transformer.Can voltage waveforms be obtained in the transformer secondary?Can consumers be connected to the secondary of the transformer? Can the waveform be obtained for the secondary currents?. Thank you very much!n
    • icellb1
      Ansys Employee
      Hi, @andrein,nYes Maxwell can do that. You can add current/voltage sources and load for both primary and secondary side in the winding excitation setup window. And you can plot out input or induced current/voltage on both sides in result tab in the history tree. Here's a youtube video about 3-phase transformer simulation in Maxwell which would help with your single-phase
    • andrein13
      Subscriber
      Thank you icellb1 for your time and explanations.n
Viewing 2 reply threads
  • You must be logged in to reply to this topic.