-
-
January 24, 2018 at 2:03 pm
rmabd
SubscriberHi
I want to simulate chip formation of metal cutting in ANSYS explicit Dynamic. I have problem in Analysis Setting to model the chip flow over the tool rake face. Thanks for helping and providing information or related tutorials.
-
January 24, 2018 at 2:03 pm
rmabd
SubscriberHi
Can you please help in how to simulate chip formation in ANSYS Explicit Dynamic
-
January 24, 2018 at 3:09 pm
peteroznewman
SubscriberHere is a relevant discussion.
You can use the Attach button that appears next to your posts to upload a Workbench Project Archive file (.wbpz) as long as it is < 120 MB. You can Clear Current Data on the Model or Mesh to reduce the size of the .wbpz file.
Make sure you mention which version of ANSYS you are using (18.2 17.2) and which license (Student or full).
-
- You must be logged in to reply to this topic.

Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.

Ansys Blog
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- Saving & sharing of Working project files in .wbpz format
- An Unknown error occurred during solution. Check the Solver Output…..
- Understanding Force Convergence Solution Output
- Solver Pivot Warning in Beam Element Model
- Colors and Mesh Display
- How to calculate the residual stress on a coating by Vickers indentation?
- whether have the difference between using contact and target bodies
- What is the difference between bonded contact region and fixed joint
- The solver engine was unable to converge on a solution for the nonlinear problem as constrained.
- User manual
-
2656
-
2120
-
1347
-
1118
-
461
© 2023 Copyright ANSYS, Inc. All rights reserved.