December 19, 2019 at 4:18 ampradeepAKSubscriber
Hey guys, I am currently working on a project which was the simulation of Tesla turbine. I was planning to calculate the speed and torque of the rotor of Tesla turbine with an inlet flow with 1 Pa. Does anyone know how to "set up" the boundary condition for this by using Fluid Flow (Fluent)? Hope somebody could explain the theory to me~~ Much appreciate guys...
and please explain how to do a CFD Analysis...
December 19, 2019 at 11:39 amRobAnsys Employee
How to do a CFD analysis is simple. Figure out what you want to model, build the geometry, mesh it, set up the solver, run & post process.
Maybe start by doing the tutorials (click on Help), watch YouTube and (if you're keen) read the manual?
- You must be logged in to reply to this topic.
Boost Ansys Fluent Simulations with AWS
Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- Suppress Fluent to open with GUI while performing in journal file
- Floating point exception in Fluent
- What are the differences between CFX and Fluent?
- Heat transfer coefficient
- Getting graph and tabular data from result in workbench mechanical
- Difference between K-epsilon and K-omega Turbulence Model
- The solver failed with a non-zero exit code of : 2
- Time Step Size and Courant Number
- Mesh Interfaces in ANSYS FLUENT
- error: Received signal SIGSEGV
© 2023 Copyright ANSYS, Inc. All rights reserved.