July 1, 2020 at 6:11 pmzaryabazeemSubscriber
Hi! can Any one know how to tracks solid using DPM in fluent? Like cut size of particles in hydro-cyclone simulation.
July 2, 2020 at 1:46 pmRobAnsys Employee
You mean how many of each size go which way? Set one end as trap and the other as escape. Use uniform particle size injections and do NOT scale the injection by area. When you run a DPM update (or track or plot) you'll see 1234 tracked, 1200 escape, 34 trapped in the text window.
July 11, 2020 at 10:29 amzaryabazeemSubscriber
Thank you rwoolhou! i got your point. but how to deal number of particles in transient state. As injected particle take some time to move toward either end ends. should I introduce injection for a instance only, or continously.
- You must be logged in to reply to this topic.
Boost Ansys Fluent Simulations with AWS
Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- Suppress Fluent to open with GUI while performing in journal file
- Floating point exception in Fluent
- What are the differences between CFX and Fluent?
- Heat transfer coefficient
- Getting graph and tabular data from result in workbench mechanical
- The solver failed with a non-zero exit code of : 2
- Difference between K-epsilon and K-omega Turbulence Model
- Time Step Size and Courant Number
- Mesh Interfaces in ANSYS FLUENT
- error in cfd post
© 2023 Copyright ANSYS, Inc. All rights reserved.