December 19, 2019 at 12:01 amsanshan1994Subscriber
When using the species transport model, how do I pull out volume concentration values of each species during post processing? Fluent only seems to provide mass fraction, mole fraction, molar concentration.
December 19, 2019 at 5:50 amDrAmineAnsys EmployeeYes you need your input of volume concentration or partial density to mass fraction.
December 19, 2019 at 7:58 pmsanshan1994SubscriberHi, thank you for the reply, but I do not quite understand what you mean by input vol conc.? While giving the inputs we only mention mass fraction as well as the velocities.
In my case I'm trying to validate a case where nitrogen is being mixed in air, and to compare my results to the reference I need volume concentration that I'm not able to get directly from fluent. Is there any way I can obtain this from fluent?
December 20, 2019 at 9:37 amRobAnsys Employee
Use the custom field functions (User Defined tab). As they're gases isn't volume fraction the same as mole fraction? It's been a while since I last had to think about it.
- You must be logged in to reply to this topic.
Boost Ansys Fluent Simulations with AWS
Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- Suppress Fluent to open with GUI while performing in journal file
- Floating point exception in Fluent
- What are the differences between CFX and Fluent?
- Heat transfer coefficient
- Getting graph and tabular data from result in workbench mechanical
- Difference between K-epsilon and K-omega Turbulence Model
- The solver failed with a non-zero exit code of : 2
- Time Step Size and Courant Number
- Mesh Interfaces in ANSYS FLUENT
- error: Received signal SIGSEGV
© 2023 Copyright ANSYS, Inc. All rights reserved.