October 25, 2020 at 4:28 pmCAE_T_CSubscriber
Implicit analysis is the standard method to solve springback problems. However the convergence using implicit solver is a big concern. In many cases, no converged results could be achieved. I developed an alternative method which uses explicit solver to solve springback problems. I would like to put this as a topic for open discussion. Your comments are highly appreciated. You can check the following link to view the method.","embedType":"youtube","name":"Ls-Dyna Special Topics: Topic 1 Springback Analysis Using Explicit Solver Part 1 Linear Material","frameSrc":"https://www.youtube.com/embed/RNTw2jagmMw?feature=oembed&autoplay=1"}">October 26, 2020 at 1:49 pmChris QuanAnsys EmployeeThanks for sharing.nViewing 1 reply thread
- You must be logged in to reply to this topic.
Simulation World 2022
Check out more than 70 different sessions now available on demand. Get inspired as you hear from visionary companies, leading researchers and educators from around the globe on a variety of topics from life-saving improvements in healthcare, to bold new realities of space travel. Take a leap of certainty and check out a session today here.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- explicit dynamics
- Explicit dynamics ERRORS
- turning simulation
- getting zero maximum and minimum stress value in explicit analysis
- Monte Carlo Simulation
- How do get Full values instead of just minimum and maximum ?
- Running an explicit dynamics simulation on a composite plate
- Euler Domain Restricting Simulation
- LS-Dyna not appearing in ANSYS Workbench
- Which analysis to use for dynamic and quasi-static compression of auxetic structures?
© 2022 Copyright ANSYS, Inc. All rights reserved.