April 9, 2020 at 9:44 am
April 9, 2020 at 10:57 amAniketAnsys Employee
Select the body, insert a method: Sweep and use manual sorce as well as target faces of the large faces in the side where you have mapped mesh.
April 9, 2020 at 11:48 amKgpNiko16Subscriber
ohh thanks it worked , is this trick means that the mesh is being revolved from source to target.
Also if possible please suggest how to decide the angle of rotation for the sector ?
April 9, 2020 at 12:10 pmAniketAnsys Employee
Do you mean the number of divisions? If yes, you can check the number of sweep divisions setting in sweep method for that.
April 10, 2020 at 9:58 amKgpNiko16Subscriber
No i mean i have one cell thick sector but the angle of rotation of geometry about the axis.
Keeping in mind the mesh metrics like 1. orthogonality
2 . skewness
- You must be logged in to reply to this topic.
Simulation World 2022
Check out more than 70 different sessions now available on demand. Get inspired as you hear from visionary companies, leading researchers and educators from around the globe on a variety of topics from life-saving improvements in healthcare, to bold new realities of space travel. Take a leap of certainty and check out a session today here.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- ANSYS Workbench Measuring within Design
- How to resolve Mesh Failure
- check element type
- The mesh file exporter could not resolve cyclic dependencies in overlapping contact regions error
- Meshing Error
- Error in meshing
- Conformal vs Non-Conformal Mesh
- Ansys 19.0 – will not create mesh
- Dealing with inflation layers around sharp corners in Ansys workbench meshing
- execution error inside the mesher. The process suffered an unhandled exception or ran out of memory
© 2022 Copyright ANSYS, Inc. All rights reserved.