October 6, 2020 at 10:26 amfdinhSubscriber
I have a transient study in which I turn on some heaters to heat up certain elements and then shut them down to study the temperature evolution.October 7, 2020 at 1:42 amKarthik RAdministratorHello,nI don't completely understand why you are running it as two separate simulations. Why can you not run a single simulation for this?nCould you please elaborate on what you are attempting to do?nThanks.nKarthiknOctober 7, 2020 at 8:32 amfdinhSubscriberIf you look at the graph above, the reason I have to run two simulation is that for the first part (the ramp and the plateau) the temperature is strictly imposed, I want my bodies to follow a certain trend.nIn the second part I want to see how the temperature of the bodies evolve based on the heat exchange with other bodies (there's radiation principally and a bit of convection). For this reason, i cannot have an imposed temperature as a condition, because that would constrain me: I want it as a free parameter.nViewing 2 reply threads
Ansys Innovation Space
- You must be logged in to reply to this topic.
Simulation World 2022
Check out more than 70 different sessions now available on demand. Get inspired as you hear from visionary companies, leading researchers and educators from around the globe on a variety of topics from life-saving improvements in healthcare, to bold new realities of space travel. Take a leap of certainty and check out a session today here.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.Trending discussions
- ANSYS Workbench Measuring within Design
- How to resolve Mesh Failure
- check element type
- The mesh file exporter could not resolve cyclic dependencies in overlapping contact regions error
- Meshing Error
- Error in meshing
- Conformal vs Non-Conformal Mesh
- Ansys 19.0 – will not create mesh
- Dealing with inflation layers around sharp corners in Ansys workbench meshing
- execution error inside the mesher. The process suffered an unhandled exception or ran out of memory
Top Rated Tags
© 2022 Copyright ANSYS, Inc. All rights reserved.Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.