Fluids

Fluids

System Coupling raw data extraction (WORKBENCH)

    • ngarcia_ncs
      Subscriber

      Hello all,

      I have a Transient-Structural + Fluent + System Coupling simulation that also user the Piezo-MEMS extension. It takes ultrasound and produces a USER-DEFINED result VOLT. The simulation output is supposed to be voltage vs. time. I have successfully run the simulation according to the system coupling graph, but the results do not show any raw data of voltage vs. time. I want to extract this data so I can perform signal processing in MATLAB.

    • Stephen Orlando
      Ansys Employee
      Hi Nick You'll need to get voltage vs time from Mechanical. I think a Result Tracker is the way to do this, https://ansyshelp.ansys.com/account/secured?returnurl=/Views/Secured/corp/v221/en/wb_sim/ds_Result_Tracker_o_r.html
      Steve
Viewing 1 reply thread
  • You must be logged in to reply to this topic.