November 1, 2023 at 1:17 pmRoger SwareySubscriber
On older versions of SC there were translator add-ons to be able to open files in other formats. With the new Discovery version, I didn't seem to need that until I now that I downloaded Version 2023, Service Pack 2. I can no longer open .ipt files, what do I need to do to be able to do so?
November 2, 2023 at 4:57 amDevendra BadgujarForum Moderator
When you are installing Discovery it is important to verify you have Ansys Geometry Interfaces Selected. Then you will also need to configure these options. If you skip the configuration, you will need to manually configure these geometry interfaces using the Product & CAD Configuration Manager before you can successfully import models into Ansys products.
You can launch Product & CAD Configuration Manager from the Windows Start Menu. Make sure you have all the required options selectioned as mentioned in the images below:
For more information, please go through the 3.1. Installing Ansys Discovery help documentation.
- You must be logged in to reply to this topic.
Boost Ansys Fluent Simulations with AWS
Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- How to work with STL file?
- Rotate tool in ANSYS Design Modeler
- section plane
- Using Symmetry in DesignModeler and Expanding the Results
- ANSYS FLUENT – Operation would result in non manifold bodies
- drawing a geometry by importing a table of points
- material properties
- Coordinates orientation
- “contact pair has no element in it.” how to resolve this problem
- Parameters not imported into Workbench 18.2 from Solidworks/Inventor
© 2023 Copyright ANSYS, Inc. All rights reserved.