Learning Forum

[mohammedlaminemekhalfia]

 

Well I tried To resolve The HW for 2D conduction on EDX training

Even that in  the first part I was succefull runing the solution but yet when coming to resolve the HW I recieved this message 

An unknown error occurred during solution.  Check the Solver Output on the Solution Information object for possible causes.

Find attached the solution information

 

[peteroznewman]

I am familiar with the edX 2D conduction homework problem.

You need to insert screen snapshot images of your model into your reply.  You need to show the details window and geometry for all the boundary conditions, the material definition in the Engineering Data so I can help you find the mistake.

[mohammedlaminemekhalfia]

Thanks a lot Mr Peter after 2 days of trying I have succeeded in defining my Faults.

The solver is working and my results was right and just

[oamarquezr]

Hello Mr Peteroznewman,

 

I am a beginner with ANSYS, and I've been struggling with a simulation for a couple of weeks. I've already posted it, #Permalink "Error for flexible bending actuator",  but it seems nobody will look at it. Did a do a mistake posting it, lack of information of the file was not well uploaded?

Thank you for your help

[peteroznewman]

 Hello oamarquezr,

I don't use fiber reinforced structures, so I don't know what is wrong with your model without first doing a significant amount of research. I can't promise anything but will take a look tomorrow.