June 26, 2020 at 12:15 pmKurrninSubscriber
I'm the process of doing my Masters project, which deals with comparing Polymer/Clay nanocomposites that have been produced using both FDM and injection moulding and how the size of the inlet/nozzle affects the mechanical properties.
I have never used Fluent before, so I am at a loss on where to begin. Does anyone have any tutorials or anything that can help me do my project? I just have no idea where to begin so any help would be greatly appreciated.
June 26, 2020 at 12:32 pmRobAnsys Employee
If you're using the 2019 or 2020 code click on "Help" and you'll get to the tutorials and documentation. There are also training courses available from us at a price.
Re the actual problem, discuss with your supervisor and also review the documentation on Polyflow.
June 26, 2020 at 1:05 pmKurrninSubscriber
Okay that's great to know thank you for the help
- You must be logged in to reply to this topic.
Boost Ansys Fluent Simulations with AWS
Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- Suppress Fluent to open with GUI while performing in journal file
- Floating point exception in Fluent
- What are the differences between CFX and Fluent?
- Heat transfer coefficient
- Getting graph and tabular data from result in workbench mechanical
- The solver failed with a non-zero exit code of : 2
- Difference between K-epsilon and K-omega Turbulence Model
- Time Step Size and Courant Number
- Mesh Interfaces in ANSYS FLUENT
- error in cfd post
© 2023 Copyright ANSYS, Inc. All rights reserved.