Fluids

Fluids

velocity in the porous media

    • douniaextra1
      Subscriber

      hello everyone


      I'm simulating a porous media crossed by air, the porous media are modeled by the power-law model and I turn on the physical velocity in the porous formulation,


      But I realized that the velocity is high in the porous media;


      is that normal?


      it doesn't have to be high in the porous media in my case; so can someone tell me how can I lower this velocity in the porous media? 


      I'll be so glad for any comments or answers.


      Best regards,


      Dounia


       

    • DrAmine
      Ansys Employee
      Yes should be if physical formulation is used as you are reducing volume and area for flow and that is why velocity will increase.
Viewing 1 reply thread
  • You must be logged in to reply to this topic.