What boundry conditions at inlet and outlet should I use if I want to create a negtive pressure room
March 7, 2021 at 11:42 amsaphiaSubscriberHello, I am trying to create a negative pressure room to analyse the airflow however I'm not sure what boundary conditions to use at the inlet and outlet? my outlet is set as pressure outlet and inlet as pressure inlet. any help welcomenThank youn
March 7, 2021 at 12:27 pmYasserSelimaSubscribernIf you want negative pressure inside the room, set the outlet pressure as a negative pressure and the inlet as 0. n
March 7, 2021 at 3:08 pmsaphiaSubscriberThank you !n
March 7, 2021 at 3:16 pmYasserSelimaSubscriberYou are welcome!n
- You must be logged in to reply to this topic.
Earth Rescue – An Ansys Online Series
- Suppress Fluent to open with GUI while performing in journal file
- Floating point exception in Fluent
- What are the differences between CFX and Fluent?
- Heat transfer coefficient
- Getting graph and tabular data from result in workbench mechanical
- The solver failed with a non-zero exit code of : 2
- Difference between K-epsilon and K-omega Turbulence Model
- Time Step Size and Courant Number
- Mesh Interfaces in ANSYS FLUENT
- error in cfd post
© 2023 Copyright ANSYS, Inc. All rights reserved.