TAGGED: combustion, fluent, simulation
May 30, 2022 at 11:01 amluisporto_99SubscriberHello, I am a fairly new to Fluent and I am trying to simulate a combustion in a furnace with 4 inlets (fuel+air) and flue gas entering in one wall (this is a section of a bigger furnace). I am using the eddy dissipation model, and the boundary conditions I am using are mass-flow inlets and an outflow. The fuel (ch4) enters with air in the 4 inlets mixing with the flue gas and everything goes out through a single outlet. I would like to know why the simulation is not starting when I click calculate (no error pops up). I am including the other details here through pictures. I am using k-e model for turbulance and DO model for radiation. My mesh size is:
Level Cells Faces Nodes Partitions
0 35122 228920 190989 1
1 cell zone, 12 face zones.
May 31, 2022 at 3:07 amKeyur KanadeAnsys EmployeeAs Ansys Staff, we can not download attachments. Please upload images using upload image functionality.
How to access Ansys Online Help Document
Guidelines on the Student Community
- You must be logged in to reply to this topic.
Boost Ansys Fluent Simulations with AWS
Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- Suppress Fluent to open with GUI while performing in journal file
- Floating point exception in Fluent
- What are the differences between CFX and Fluent?
- Heat transfer coefficient
- Getting graph and tabular data from result in workbench mechanical
- The solver failed with a non-zero exit code of : 2
- Difference between K-epsilon and K-omega Turbulence Model
- Time Step Size and Courant Number
- Mesh Interfaces in ANSYS FLUENT
- error in cfd post
© 2023 Copyright ANSYS, Inc. All rights reserved.