August 16, 2023 at 10:44 pmdusevSubscriber
I've been trying to apply a torque about a beam/thin wire, but can't figure this out. I tried to create a rigid body for the cylinder and bond it to the wire and apply a rotation but that threw all kind of crazy errors. When I combined the files into one CAD model to merge meshes, I get a bad shearing effect whether I apply the rotation (rotary displacment) to either the cylinder face or side. What's the best approach to do this without getting this poor effect.
August 17, 2023 at 8:05 amNanda VerallaAnsys Employee
Why is the model flying around before rotating about a point? Can you share more details on your boundary and loading conditions? Also turn on large deflections.
If you are not able to open the links, refer to this forum discussion: How to access the ANSYS Online Help
For more exciting courses and certifications, hit this link: Ansys Innovation Courses | Ansys Innovation Space
- You must be logged in to reply to this topic.
Boost Ansys Fluent Simulations with AWS
Computational Fluid Dynamics (CFD) helps engineers design products in which the flow of fluid components is a significant challenge. These different use cases often require large complex models to solve on a traditional workstation. Click here to join this event to learn how to leverage Ansys Fluids on the cloud, thanks to Ansys Gateway powered by AWS.
Earth Rescue – An Ansys Online Series
The climate crisis is here. But so is the human ingenuity to fight it. Earth Rescue reveals what visionary companies are doing today to engineer radical new ideas in the fight against climate change. Click here to watch the first episode.
Subscribe to the Ansys Blog to get great new content about the power of simulation delivered right to your email on a weekly basis. With content from Ansys experts, partners and customers you will learn about product development advances, thought leadership and trends and tips to better use Ansys tools. Sign up here.
- License Error
- Error with workbench SceneGraphChart
- Sizing on Ansys Workbench 19.2
- Workbench not opening
- Error: Exception of type ‘Ansys.Fluent.Cortex.Cortex not availableException’ was thrown
- Workbench error
- how to open DesignModeler
- FlexNet Licensing – Not running
- Problem with FlexNet Licensing
- An error occurred when the post processor attempted to load a specific result.
© 2023 Copyright ANSYS, Inc. All rights reserved.